It is not entirely clear what kind of problems you may be experiencing with your Adec dental board for an older model 1005 dental chair. However, here are some general troubleshooting tips that may help:

  1. Check the power source: Make sure that the dental chair is properly plugged in and that the power source is functioning correctly. If there is no power, it could be an issue with the outlet or circuit breaker.

  2. Inspect the fuses: Check the fuses on the dental board to see if they are blown or need to be replaced. If a fuse is blown, it could be a sign of an underlying electrical problem.

  3. Check the wiring: Inspect the wiring on the dental board to make sure that there are no loose or disconnected wires. If there are, it may be necessary to re-connect or repair them.

  4. Clean the board: Dirt, debris, or other contaminants can build up on the dental board, which can affect its performance. Use a soft cloth and gentle cleaning solution to wipe down the board and remove any buildup.

  5. Contact a technician: If none of the above troubleshooting tips solve the issue, it may be necessary to contact a trained technician to diagnose and repair the problem. They will be able to identify any underlying issues and make the necessary repairs.

It is worth noting that older dental chair models may be more prone to issues due to wear and tear over time. If you are experiencing recurring problems with your Adec dental board, it may be worth considering an upgrade or replacement to ensure that your dental chair is operating at optimal performance.

Questions ? CALL 1-727-388-4223