20 Years Experience in Refurbishing, Service & Repair!
Call Support with questions 1-727-388-4223
100 % Satisfaction Guarantee
Share
Product description
This is a refurbished "New Style" Midmark/Ritter M11 Ultraclave that comes with a 1 Year Warranty for Parts.
Here's what Midmark says about their M11 Ultraclave: Efficiency and capacity go hand in hand. Increase your practice's efficiency when you increase your instrument processing capacity. With one of the largest chamber size of any tabletop sterilizer on the market, the Midmark M11 UltraClave® is designed to optimize sterilization output – reducing time and effort, but not effectiveness. Features include:
Intuitive display and simple prompts for easy operation
Automatic-open door
Four pre-programmed sterilization cycles: Unwrapped, Pouched, Packs and Handpieces
Programmable controls allow you to change exposure time, temperature, dry time and vent and store your changes if desired
Steam-Flush Pressure Pulse Air Removal System designed to ensure proper steam penetration
LCD display alerts operator if door is not closed completely or reservoir water level is low
Reservoir fill port and drain tube located in the front of the unit for ease of draining and filling
Specifications:
Overall length w/plug: 23.8" (60.5 cm)
Overall width: 17.8" (45.2 cm)
Overall height w/printer: 17.8" (45.2 cm)
Minimum countertop area: 21" (53.3 cm) D x 17.8" (45.2 cm) W
Chamber:
11" diameter (28 cm)
18" depth (45.7 cm)
6.5 gal usable volume (24.6 liters)
Unit weight: 99 lb (44.9 kg)
Shipping weight: 131 lb (59.4 kg)
Water reservoir capacity: 1.4 gal (5.3 liters)
Trays:
Two large - 9" W x 15" L x 1.1" D (22.9 cm x 38 cm x 2.9 cm)
Two small - 6.6" W x 15" L x 1.1" D (16.8 cm x 38 cm x 2.9 cm)
Electrical Requirements:
115 VAC, 50/60 Hz, 15 Amps Single Phase
115 VAC has 1425 watt tubular immersion heater
230 VAC, 50/60 Hz, 10 Amps Single Phase
230 VAC has 1500 watt tubular immersion heater
Safety Standards:
UL Listed to U.S. & Canadian Standards
UL 61010-1, 2nd Edition
IEC 61010-2-040, 1st Edition
CAN/CSA C22.2 No. 61010-1, 2nd Edition
CSA C22.2 No. 61010-2-040-07, Part 2-040, 1st Edition
Meets the requirements of ASME Boiler and Pressure Vessel Code
A separate (dedicated) circuit is recommended for this sterilizer
